- Online orders should be placed via email at: orders@AdvancedMeasurementSolutions.com.
- Please specify the following data of the LTM2214 system:
- 1) External shaft diameter (with 0.1mm tolerance)
-
2)
Internal shaft diameter and shaft typology (only in case
of hollow shafts, with 0.1mm tolerance)
- 3) Characteristics of shaft material
- 4) Minimum and maximum shaft RPM
- 5) Maximum shaft power
- 6) Lenght of interconnection cables between the frame and the electronic unit
- 7) Specify if the extended temperature range is required (and in case the length of the control cable between the frame
- and the external temperature monitoring unit)
- 8
) Dimensions of obstacles which may limit the maximum slitted discs diameter and the size of the protective covers.- If possible the client is kindly requested to send a sketch or photographs of the area in which the instrument will be installed in order to better evaluate the various fitting alternatives.
- Important note: In order to be able to install the LTM2214 a parallelepiped shaped free room coaxial with the shaft roughly of about D+ 400mm transversally and vertically (where D is the shaft diameter) and 1320mm in length along the shaft must be available.
- For spares specify the part number and the additional information required, if any.
- Within few days our technical dept. will answer your email sending the proposed dimensions of the system and a preliminary copy of the order. Dimensions can be varied slightly as per client request.
- To complete the procedure the preliminary copy of the order, and the enclosed legal note (see below), must be signed by the purchaser (only signed orders will be processed) and sent to Advanced Measurement Solutions via email at:
- orders@AdvancedMeasurementSolutions.com.
- Within few days we will send you our order acceptance which contains also the details of the payments.
Note: Please read also the legal note which must be fully accepted by the purchaser at the order (a copy signed by the purchaser will be enclosed to the order).
- 3) Characteristics of shaft material
- Payment methods:
- Online orders:
- Online clients are required to pay 70% at the order and 30% at the delivery (normally all the material is delivered with a single shipment) .
- Order type of orders (direct orders or placed by means of local agents/distributors):
- For these type of orders, different type of payment can be allowed.
- Please contact us at the email address orders@AdvancedMeasurementSolutions.com for more detailed infromations.
- Please note that, due to the fact that the mechanical assembly is designed and manufactured to client specification, the manufacturing of the ordered system will start only after the confirmation of purchaser's money transfer from our bank.
- Delivery of the system usually takes place within 12 weeks from the order money transfer, or at the date specified in our order acceptance. During this period for any information regarding the order please contact us via email at orders@AdvancedMeasurementSolutions.com.
|
Laser Torque Meters |
||
 |
Orders |
|
|
||
